Stand alone "room in a room" studio build in Orange NSW Australia
Posted: Fri, 2024-Jan-26, 21:32
Glenn
Valid questions
...as to my wife's wages, she knows that every piece of assistance brings forward the date when her car can again access the garage space which is full of building materials AND my ever increasing volume of recording/musical gear exits the house proper (Although I am also taking her out for movies/dinner tonight)
As to the ceiling, I'm doing an inside out; fyrchek at the top of those LVL joists on a frame with plastic wrapped insulation below, then muslin cover. Cabling runs in these spaces - inside the room but hidden. I'm currently installing one of the modules so will post some pics later but essentially following Stuart's reference blog https://forum.digistar.cl/viewtopic.php?f=12&t=50 but the rakes in my ceilings ruled out the large modules so I have lots of smaller ones and am currently working out whether its quicker to do them at ground level and lift or in situ - I have to do some in situ anyway - ie where the flat sections changes to rake as you can't lift one into place from below and under the silencers.
Both silencers sit above treatment areas - the return behind the soffit for the flush mounting of my Adam A7x's and the supply above/within the bass trapping at the back of the room. If my sketchup model wasn't in such a state of mess, I'd post that for clarity's sake. This design also gives me places to "hide" stuff away.
Hope that answers the question - thanks for keeping an eye on me.
Andrew
Valid questions
...as to my wife's wages, she knows that every piece of assistance brings forward the date when her car can again access the garage space which is full of building materials AND my ever increasing volume of recording/musical gear exits the house proper (Although I am also taking her out for movies/dinner tonight)
As to the ceiling, I'm doing an inside out; fyrchek at the top of those LVL joists on a frame with plastic wrapped insulation below, then muslin cover. Cabling runs in these spaces - inside the room but hidden. I'm currently installing one of the modules so will post some pics later but essentially following Stuart's reference blog https://forum.digistar.cl/viewtopic.php?f=12&t=50 but the rakes in my ceilings ruled out the large modules so I have lots of smaller ones and am currently working out whether its quicker to do them at ground level and lift or in situ - I have to do some in situ anyway - ie where the flat sections changes to rake as you can't lift one into place from below and under the silencers.
Both silencers sit above treatment areas - the return behind the soffit for the flush mounting of my Adam A7x's and the supply above/within the bass trapping at the back of the room. If my sketchup model wasn't in such a state of mess, I'd post that for clarity's sake. This design also gives me places to "hide" stuff away.
Hope that answers the question - thanks for keeping an eye on me.
Andrew